Water Garden / Small Industrial Pumps Distributor

Messner Pond Pumps — Power Tec2

Messner SPower Tec2 Pond Pump

Messner Power Tec2 pump range

Messner Power Tec2 pumps are powered by a reliable Asynchronous motor. The rotor is encapsulated by a stainless steel "can". This means no seals are required to keep liquids from the motor coil. These higher pressure pumps utilise hydraulically optimised impellers. These pumps are reliable epoxy encapsulated units ideally suited to continuously powering large fountains, waterfalls and streams. The pumps can be coupled to an intake filter or mounted outside the pond with Messners own Filter Screen modules (available separately). A selection of hose conections are also provided in the package.

hydraulically optimised impeller
Messner Pond Pumps - Power Tec2
  Power Tec2-4000 Power Tec2-6000 Power Tec2-8000 Power Tec2-10000 Power Tec2-14000
Litres - minute 69 max 103 max 135 max 167 max 233 max
Litres - hour 4100 6200 8100 10000 14000
Head - metres 4.5m 6.0m 6.5m 7.0m 8.0m
Water Depth The minimum permissible water depth for the pumps in this range is 250mm
Watts consumed 80W 100W 150W 190W 280W
Voltage 230V / 50Hz 230v / 50Hz 230V / 50Hz 230V / 50Hz 230v / 50Hz
Length Width Height (mm) 240 x 145 x 195 240 x 145 x 195 240 x 145 x 195 240 x 145 x 195 240 x 145 x 195
Discharge / outlet 1"BSPM - 25mm 1"BSPM - 25mm 1"BSPM - 25mm 1"BSPM - 25mm 1"BSPM - 25mm
Suction / inlet 1-1/4"BSPM - 32mm 1-1/4"BSPM - 32mm 1-1/4"BSPM - 32mm 1-1/4"BSPM - 32mm 1-1/4"BSPM - 32mm
Cable Length 10m 10m 10m 10m 10m
Article No. M-SUt65050 M-SUt65051 M-SUt65052 M-SUt65053 M-SUt65054
Warranty 5 years, not including Rotor unit, (consumable part subject to wear)