Messner Submersible Fountain Pumps SYSTEM M

Messner System M pump range
System M Pumps are powered by a Synchronous magnetic drive motor. The Messner System M pumps utilize a rubber mounted ceramic shaft and ceramic thrust washers. These pumps are reliable epoxy encapsulated units idealy suited to continuously powering a fountain, waterfall or a stream. The pumps can be coupled to an intake filter system or simply used with the included screen. A selection of fountain heads and hose conections are also provided in the package.
Messner Submersible Fountain Pumps SYSTEM M | |||||||
---|---|---|---|---|---|---|---|
System M 500 |
System M 800 |
System M 1100 |
System M 1200 |
System M 1600 |
System M 2101 |
System M 2600 |
|
Litres - hour | 500 | 800 | 1100 | 1260 | 1650 | 2100 | 2640 |
Head - metres | 0.7 | 1.3 | 1.5 | 1.8 | 2.2 | 2.5 | 2.7 |
Water Depth | The minimum permissible water depth for the pumps in this range is 200mm | ||||||
Watts consumed | 12 | 15 | 18 | 20 | 25 | 44 | 45 |
Voltage | 230V / 50Hz | 230v / 50Hz | 230V / 50Hz | 230V / 50Hz | 230v / 50Hz | 230V / 50Hz | 230V / 50Hz |
Length Width Height (mm) | 157 x 89 x 90 | 157 x 89 x 90 | 157 x 89 x 90 | 190 x 112 x 112 | 190 x 112 x 112 | 190 x 112 x 112 | 223 x 131 x 135 |
Discharge / outlet | 1/2"BSPF - 15mm | 1/2"BSPF - 15mm | 1/2"BSPF - 15mm | 1/2"BSPM - 15mm | 1/2"BSPM - 15mm | 1/2"BSPM - 15mm | 3/4"BSPM - 20mm |
Suction / inlet | screened with adjuster | screened with adjuster | screened with adjuster | screened with foam block | screened with foam block | screened with foam block | screened with foam block |
Included adaptor | 13-14mm 19-20mm 20-25mm |
13-14mm 19-20mm 20-25mm |
13-14mm 19-20mm 20-25mm |
13-14mm 19-20mm 20-25mm |
13-14mm 19-20mm 20-25mm |
13-14mm 19-20mm 20-25mm |
20mm 25mm 32mm |
Cable Length | 10m | 10m | 10m | 10m | 10m | 10m | 10m |
Article No. | M-SU61398 | M-SU61399 | M-SU61397 | M-SU61391 | M-SU61392 | M-SU61386 | M-SU61387 |
Warranty | 3 years, not including Rotor unit (consumable part subject to wear) |