Messner Submersible Fountain Pumps SYSTEM N
Messner System N pump range
System N Submersible Fountain Pumps are powered by a Synchronous magnetic drive motor. The Messner System N pumps utilize a rubber mounted ceramic shaft and ceramic thrust washers. These pumps are reliable epoxy encapsulated units, idealy suited to continuously powering a small waterfall or stream . The pumps have a large surface area screen. Integrated adjustable flow control (down to 25%). A selection of fountain heads and hose connectors are included.
Integrated suction flow control by 25% minimum.
| Messner Submersible Fountain Pumps SYSTEM N | |||||
|---|---|---|---|---|---|
| System N 850 |
System N 1200 |
System N 3000 |
System N 3400 |
System N 4000 |
|
| Litres - hour | 800 | 1200 | 3200 | 3400 | 3900 |
| Head - metres | 1.3 | 1.8 | 2.55 | 3.0 | 2.8 |
| Water Depth | The minimum permissible water depth for the pumps in this range is 200mm | ||||
| Watts consumed | 15 | 25 | 55 | 65 | 65 |
| Voltage | 230V / 50Hz | 230v / 50Hz | 230V / 50Hz | 230V / 50Hz | 230v / 50Hz |
| Length Width Height (mm) | 170 x 172 x 110 | 170 x 172 x 110 | 210 x 210 x 128 | 210 x 210 x 128 | 210 x 210 x 128 |
| Discharge / outlet | 1/2"BSPF - 15mm | 1/2"BSPM - 15mm | 3/4"BSPM - 20mm | 3/4"BSPM - 20mm | 3/4"BSPM - 20mm |
| Suction / inlet | screened with adjuster | screened with adjuster | screened with adjuster | screened with adjuster | screened with adjuster |
| Included adaptor | 13-14mm 19-20mm 25mm |
13-14mm 19-20mm 25mm |
20mm 25mm 32mm |
20mm 25mm 32mm |
20mm 25mm 32mm |
| Cable Length | 10m | 10m | 10m | 10m | 10m |
| Article No. | M-SUn61360 | M-SUn61361 | M-SUn61365 | M-SUn61363 | M-SUn61368 |
| Warranty | 2 years, not including Rotor unit (consumable part subject to wear) | ||||
